|
Support the Bulletin Board Buy a Gift for someone
nice
|
Please Pay
with PayPal
smokndav23(at)charter.net
you
can use your credit card there.
use @ not (at)
|
Other
Parts ,
Kick Levers, Gears, accessories
Big
bore kits, 10-1/2 to 1 compression pistons
CNC machined
from lightweight alloy and manufactured by JE
to our specifications. These piston designs
were first pioneered in the 70's by the top XL tuners,
but, over the years, the designs have been refined.
You simply
bore your cylinder and fit the pistons for
an immediate increase in horsepower and torque.
For maximum effectiveness you should mount an aftermarket
exhaust and do some slight carb re-jetting, but
the pistons perform well in a stock configuration,
-
86mm
for the XL350, includes piston, rings, wrist
pin, & JE Cir clips,
-
$209
New
Stock
NOW!. Shipping extra
|
Complete big bore kit, ready to
install including, 86mm high performance piston,
rings, wrist pin and clips, head & base gasket,
and cylinder, bead blasted, bored to .0025 clearance.
Exchange for good cyl. not bored more than 2nd over
and no broken fins.
$305.00 + shipping
$305
in
Stock
NOW!. Shipping extra
|
-
79mm
for the XL250, includes piston, rings, wrist
pin, & JE Cir clips, $209
Not in stock- 6 weeks Delivery
- Shipping is extra
Cometic
base and head gaskets for 89mm or 86mm over
bore, $35.95 set + Shipping
Click for Picture
NOS* Honda and after market gaskets for XL250 and
XL350 sideport only. Email for availability and
prices. 29.95 to 49.95
(*New
Old Stock)
|
Complete
Top End Gasket set for XL350 (side port)(not for
86mm overbore) $29.95
Complete
Gasket set for XL350 (side port) (not for 86mm overbore)
$49.95 (if Available)
Complete
Engine Gasket set (Upper & Lower end stock)
for XL 250 $49.95
Cylinder
boring; exchange $85, without usable core, $175
Cometic
cylinder head gaskets for 86mm over-bore, $35.95;
made from the proper fiber and fire ring combination,
.059" thickness. (Also available in copper,
email for prices.)
|
| We now have
several piston and ring sets
in stock for the XL250, Standard and oversize
stock NOS, high compression standard bore,big bore
and even XLint condition used. Prices from $50.00
|
 |
Performance grade XL350 valves, new, CNC manufactured
to XLint specs by Kibblewhite Precision Machine using
modern metallurgy. Unlike the stock Honda valves they
are resistant to bending, complete set of four, $220
|
Good used intake or exhaust rocker, $89.00 each set
|
Megacycle
Performance cams
Other
Parts ,
Kick Levers, Gears, accessories
Good used stock
cam (if available), $100
New or good
used cam chain tensioner arm (NLA from Honda), $ 75 each
Re-built head
or good used head (good journals), including. valve cover,
w/o cam, w/o valves, $95 exchange, without your usable
core, $195
Used clutch
plate sets, $50 (within service limits)
Gear sets, $150
Good used crankshaft
with connecting rod, $150
Shifter mechanism,
with good splines, complete from case outwards, $135
Starter mechanism,
with good splines, complete from case outwards, $135
(We have a few Kick levers available $49)
XL350 swing
arm (bolt on to XL250 frame) longer for better handling,
used, $150
Plastic tank
(email for quote), or order an Elsinore style
34, 36 or 38mm
Mikuni carb, jetted to 4stk performance specs, (email
for quote)
XL250 and 350
sideport (1972 thru 1975) engines, race kitted (big bore
piston, your choice of cam, ported and rebuilt head, all
other componentry in good condition) with no carb, approximately
$2,000 ready to install in frame, with Mikuni, and run-in
on test stand, $2,500. 50% deposit with order, 4 to 6
weeks delivery. Adjustments to price can be made depending
on purchaser supplying good engine cores or parts.
XL250 and XL350
new and used parts; instruments, handlebars and controls,
forks, side covers and air boxes, Honda fenders, front
and rear complete wheel assemblies, tail and head lights,
Honda and after market fenders, frames, tanks, engines
and engine components, including kick starter and shifter
assemblies, seats in need of new covers, etc.
New
and In Stock
only
$99.00
Plus Shipping
3 Day Shipping
and Handling from $25.00 for US delivery, Add $2.50 for
Insurance
Standard Shipping $20.00 - Canada
$25.00 to $30.00 4-5 days
Above: standard length 13 3/8 or long travel 14
5/8 inchh
99.00
Part Number =MIDI |
Limited Supply of NOS Redwing Shocks
Stock Length for XL 350/250
$89.00
Part Number = redwing |
 |
NEW
in stock, The famous Red Wing hammerhead shocks. Rebuildable,
13 3/8 inch $125.00 + shipping
|
|
